Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;

25 January 2021
No Comments
Uncategorized

Atlantik V2 just how to connect with the Wi Fi Router or Control several light without router;

to get in touch the Atlantik V2.X to your property Wi Fi router you need to stick to the 11 actions.

1. Switch off all units.

2. Switch on just the very first device you will link.

3. In your tablet pick the wifi-socket.

4. Start Chrome from your own tablet and type 192.168.1.100 within the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community SSID and password. ( Encryption constantly Disable : ( the system believe it is automaticly )

9. Head to system when you look at the main menu, and then click restart.

10. Head to wifi setting once again and alter to your system router SSID.

11. get the Orphek software and do search id, it must discover the very first device.

Then do from 1 to 11 for the staying units.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

Within the SSID package you shall enter fabswingers your system name. This might be situation delicate therefore make sure to utilize money or little letters so its proper. Into the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )

Select /Keep ,disable into the encryption box (try not to confuse with encryption key package). Your tablet will immediately discover the encryption key in the event your router supports it.

9. Within the left that is upper of UART display you will definitely a range of fundamental, Advanced, and System.

Select system TAB plus in the first part of this web web page you’ll see a restart key. Press the restart key. a screen appear saying the web browser cannot hook up to the internet protocol address. This is certainly fine since you should have to connect with your router SSID.

10. On your own tablet /Phone hook up to your wi-fi Router network SSID.

The clear button on the upper right of the screen 11.Open the Orphek app and click. Now click on the search key situated on the top left associated with the display. Your community should get the tablet as well as your IP that is new address your Orphek light should appear.

Perform actions 1 to 11 when it comes to staying Orphek devices.

* choice : you are able to set the internet protocol address fixed , for better connection

You will then go to:

A. Unchecked The Enable DHCP

B. Enter a fixed ip that belongs to your residence router. As an example:

Then you are able to enter 100.168.20.2 or any internet protocol address between .2 and .254 In the event your router is 100.168.20.1.

the IP address must be unique if not it shall result in a internet protocol address conflict

C. It’s also advisable to go into the submask plus in most cases its 255.255.255.0.

D. Enter the Gateway Address : it must be your Router internet protocol address

E. Then perform some exact same into the units that are remaining. BUT etch unit should have unique ip .

instance:

In the event your House Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

then chances are you should set product 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system when you look at the menu that is main and then click restart.

12. get the Orphek application and do search id, it will get the first product.

then chances are you should set product 2 вЂ“

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )